document number: 83748 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 23-oct-08 927 phototriac, zero crossing, 1.5 kv/s dv/dt, 600 v VO3062, vo3063 vishay semiconductors description the VO3062/3063 triac driver family consists of a gaas infrared led optically coupled to a monolithic photosensitive zero crossing triac detector chip. the 600 v blocking voltage permits control of off-line voltages up to 240 vac, with a safety factor of more than two, and is sufficient for as much as 380 v. features ? 1500 v/s dv/dt minimum ? 600 v blocking voltage ? 100 ma on-state current ? zero crossing detector ? low input trigger current ? 6 pin dip package ? lead (pb)-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec applications ? household appliances ? triac drive/ac motor drives ? solenoid/valve controls ? office automation equipment/machine ? temperature (hvac)/lighting controls ? switching power supply agency approvals ? ul1577, file no. e52744 system code u/j ? cul - file no. e52744, equivalent to csa bulletin 5a ? din en 60747-5-5 (vde 0884) available with option 1 ? bsi iec 60950 note for additional information on the availabl e options refer to option information. i179030 1 2 3 6 5 4 mt2 mt1 n c a c n c *zero crossing circ u it zcc* order information part remarks vo3063 dip-6, zc, 600 v, i ft = 5 ma VO3062 dip-6, zc, 600 v, i ft = 10 ma vo3063-x006 dip-6 400 mil, zc, 600 v, i ft = 5 ma VO3062-x006 dip-6 400 mil, zc, 600 v, i ft = 10 ma vo3063-x007t smd-6, zc, 600 v, i ft = 5 ma VO3062-x007t smd-6, zc, 600 v, i ft = 10 ma absolute maximum ratings parameter test condition part symbol value unit input reverse voltage v r 6v forward current - continuous i f 60 ma power dissipation p diss 100 mw output off state output terminal voltage VO3062/3063 v drm 600 v peak repetitive surge current pw = 100 ms, 120 pps i tsm 1a power dissipation p diss 200 mw on-state rms current i t(rms) 100 ma www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83748 928 rev. 1.6, 23-oct-08 VO3062, vo3063 vishay semiconductors phototriac, zero crossing, 1.5 kv/s dv /dt, 600 v note t amb = 25 c, unless otherwise specified. stresses in excess of the absolute maximum ratings can cause permanent damage to the device. f unctional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. exposure to absolute ma ximum ratings for extended periods of the time c an adversely affect reliability. fig. 1 - on-state current (rms) vs. temperature note the allowable load current was calculated out under a given operating conditi ons and only for reference: led power: q e = 0.015 w, r ba (2-layer) = 72 c/w note the thermal model is represented in the thermal network below. ea ch resistance value given in th is model can be used to calcula te the temperatures at each node for a given oper ating condition. the thermal resistance fr om board to ambient will be dependent on th e type of pcb, layout and thickness of copper traces. for a detailed explanation of the thermal model, please reference vishay's thermal chara cteristics of optocouplers application note. coupler isolation test voltage t = 1 s v iso 5300 v rms total power dissipation p tot 300 mw operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 55 to + 150 c soldering temperature maximum 10 s t sld 260 c thermal characteristics parameter test condition symbol value unit maximum led junction temperature t jmax 125 c maximum output die junction temperature t jmax 125 c thermal resistance, junction emitter to board jeb 150 c/w thermal resistance, junction emitter to case jec 139 c/w thermal resistance, junction detector to board jdb 78 c/w thermal resistance, junction detector to case jdc 103 c/w thermal resistance, junction emitter to junction detector jed 496 c/w thermal resistance, case to ambient ca 3563 c/w absolute maximum ratings parameter test condition part symbol value unit 0 20 40 60 8 0 100 120 - 40 - 20 0 20 40 60 8 0100 i f = 10 ma 21353 load c u rrent (ma) temperat u re (c) www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 83748 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 23-oct-08 929 VO3062, vo3063 phototriac, zero crossing, 1.5 kv/s dv/dt, 600 v vishay semiconductors note t amb = 25 c, unless otherwise specified. minimum and maximum values were tested requier ements. typical values are characteristic s of the device and are the result of en gineering evaluations. typical values are for information onl y and are not part of the testing requirements. t a ca t c t jd t je t b ec eb dc db ba de t a 19996 package electrical characteristcs parameter test condition part symbol min. typ. max. unit input reverse current v r = 6 v i r 10 a forward voltage i f = 30 ma v f 1.2 1.5 v output leakage with led off, either direction v drm = 600 v i drm 10 500 na critical rate of rise off-state voltage v d = 400 v dv/dt 1500 2000 v/s coupler led trigger current, current required to latch output vo3063 i ft 5ma VO3062 i ft 10 ma peak on-state voltage, either direction i tm = 100 ma peak, i f = rated i ft v tm 1.7 3 v holding current, either direction i h 200 a inhibit voltage (mt1-mt2 voltage above which device wi ll not trigger) v inh 12 22 v leakage in inhibited state if = 10 ma maximum, at rated v drm , off state v drm2 250 1000 a safety and insulation ratings parameter test condition symbol min. typ. max. unit climatic classificati on iec 68 part 1 40/85/21 pollution degree din vde 0109 2 comparative tracking index pe r din iec 112/vde 0303 part 1, group iiia per din vde 6110 175 399 cti 175 highest allowable overvoltage transient overvoltage v iotm 8000 v peak maximum working insulation voltage recurring peak voltage v iorm 890 v peak insulation resistance at 25 c v io = 500 v r is 10 12 insulation resistance at t s v io = 500 v r is 10 9 insulation resistance at 100 c v io = 500 v r is 10 11 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83748 930 rev. 1.6, 23-oct-08 VO3062, vo3063 vishay semiconductors phototriac, zero crossing, 1.5 kv/s dv /dt, 600 v note as per iec 60747-5-2, 7.4.3.8.1, this optoc oupler is suitable for ?safe electrical insulation? only within the safety ratings. compliance with the safety ratings shall be ensured by means of prodective circuits. typical characteristics t amb = 25 c, unless otherwise specified fig. 2 - forward voltage vs. forward current fig. 3 - off-state leakage current vs. temperature fig. 4 - on-state current vs. v tm fig. 5 - normalized trigger current vs. temperature partial discharge test voltage method a, v pd = v iorm x 1.875 v pd 1325 v peak safety limiting values - maximum values allowed in the event of a failure safety power rating p so 400 mw safety current rating i si 150 ma safety temperature rating t si 165 c minimum external air gap (clearance) measured from input terminals to output terminals, shortest distance through air 7mm minimum external tracking (creepage) measured from input terminals to output terminals, shortest distance path along body 7mm safety and insulation ratings parameter test condition symbol min. typ. max. unit 0. 8 0.9 1.0 1.1 1.2 1.3 1.4 110100 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) 19620 ta = 8 5 c ta = 25 c ta = - 40 c 1 10 100 1000 - 40 - 20 0 20 40 60 8 0100 temperat u re (c) i lkg (na) 19619 - 100 - 8 0 - 60 - 40 - 20 0 20 40 60 8 0 100 - 2 - 1.5 - 1 - 0.5 0 0.5 1 1.5 2 on-state v oltage v tm ( v ) on-state c u rrent i tm (ma) 19605 0 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 - 40 10 60 110 temperat u re (c) trigger c u rrent 19621 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 83748 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 23-oct-08 931 VO3062, vo3063 phototriac, zero crossing, 1.5 kv/s dv/dt, 600 v vishay semiconductors fig. 6 - turn-on time vs. led current fig. 7 - normalized holding current vs. temperature fig. 8 - turn-on time vs. temperature fig. 9 - trigger current vs. pulse width package dimensions in inches (millimeters) 1 10 100 5 8 11 14 17 20 led c u rrent (ma) t u rn-on time ( s) 1961 8 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 1. 8 2.0 - 40 - 20 0 20 40 60 8 0100 temperat u re (c) holding c u rrent 1960 8 0 3 6 9 12 15 - 40 - 20 0 20 40 60 8 0100 temperat u re (c) t u rn-on time ( s) 19602 2.0 2.5 3.0 3.5 4.0 4.5 5.0 20 40 60 8 0100 p u lse w idth ( s) i ft (ma) 19609 i17 8 014_1 0.00 8 (0.20) 0.012 (0.30) 0.130 (3.30) 0.150 (3. 8 1) 0.130 (3.30) 0.150 (3. 8 1) 0.033 (0. 8 4) typ. 0.300 (7.62) typ . 0.033 (0. 8 4) typ. 0.100 (2.54) typ. 0.039 (1.00 ) min . 0.01 8 (0.46) 0.020 (0.51) 0.04 8 (1.22) 0.052 (1.32) 0.24 8 (6.30) 0.256 (6.50) 0.335 ( 8 .50) 0.343 ( 8 .70) pin one id 6 5 4 1 2 3 1 8 3 - 9 0.300 to 0.347 (7.62 to 8 . 8 1) 4 typ . iso method a 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) 0.307 (7. 8 ) 0.291 (7.4) 0.407 (10.36) 0.391 (9.96) 20 0.315 ( 8 .0) min. . 0.300 (7.62) typ. 0.1 8 0 (4.6) 0.160 (4.1) 0.331 ( 8 .4) min. 0.406 (10.3) max. 0.02 8 (0.7) option 7 o ption 6 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 83748 932 rev. 1.6, 23-oct-08 VO3062, vo3063 vishay semiconductors phototriac, zero crossing, 1.5 kv/s dv /dt, 600 v ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national an d international stat utory requirements. 2. regularly and continuously improve the performance of ou r products, processes, distri bution and operating systems with respect to their impact on the health and safety of our employ ees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances into the atmosp here which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london am endments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international in itiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of c ontinuous improvements to eliminat e the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively. 2. class i and ii ozone depleting substances in the clean air ac t amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applicat ions. all operating parameters must be validat ed for each customer application by the customer. should the buyer use vishay semi conductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, damag es, and expenses, arising out of , directly or indirectly, any claim of personal damage, injury or death associat ed with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
